STMicroelectronics SR5E1x Stellar E 32-bit Automotive MCUs
STMicroelectronics SR5E1x Stellar E 32-bit Arm® Cortex®-M7 Automotive MCUs are designed to meet the enhanced digital control and high-performance analog for wide bandgap power technologies, silicon carbide/GAN, and power conversion applications. The SR5E1x MCUs offer superior real-time and safe performance with high ASIL-D capability, security cryptographic services (HSM), and high-efficiency over-the-air (OTA) reprogramming capability. These features enable the continuous optimization of performance and post-sale upgrades of vehicle functions. The SR5E1x Stellar E 32-bit Arm® Cortex®-M7 Automotive MCUs are available in two variations: a 14mm2 TQFP100 (SR5E1E3) package and a 24mm2 LQFP176 (SR5E1E7) package. Applications include onboard chargers, DC/DC converters, and advanced motor control like traction inverters.
Stellar Platform
Features
- AEC-Q100 automotive qualification pending
- Digital and analog high-frequency control requested by wide-bandgap technologies (Silicon Carbide and Gallium Nitride)
- High-speed security cryptographic services (HSM)
- Superior real-time and functional safety performance (ASIL-D capability)
- Built-in fast and cost-optimized OTA (over-the-air) reprogramming capability (with built-in dual image storage)
Specifications
- Cores
- 2x 32-bit Arm® Cortex®‑M7 with double-precision FPU, L1 cache, and DSP instructions (Split-lock configuration, allowing either 2 cores in parallel or 1 core in lockstep configuration)
- 2x DMA engines in lockstep configuration
- Memory
- Up to 2MB on-chip Flash memory with read/write support
- 1920KB code Flash memory split in two banks allowing 960KB OTA reprogramming support
- 160KB HSM dedicated code Flash memory
- 96KB data Flash memory (64KB + 32KB dedicated to HSM)
- 488KB on-chip general-purpose SRAM
- 2x 32KB instruction TCM + 2x 64KB data TCM
- 256KB system RAM
- 40KB HSM dedicated system RAM
- Up to 2MB on-chip Flash memory with read/write support
- Hardware security module (HSM)
- On-chip high-performance security module with dedicated RAM and Flash
- Based on Cortex®‑M0+ core
- Hardware accelerator for symmetric cryptography
- Safety (comprehensive generation ASIL-D safety concept)
- State of the art safety measures at all levels of the architecture for efficient implementation of ISO26262 ASIL-D functionalities
- FCCU for collection and reaction to failure notifications with enhanced configurability
- Memory error management unit (MEMU) for collection and reporting of error events in memories
- Cyclic redundancy check (CRC) unit
- Enhanced peripherals for fast control loop capability
- 12x timers
- 2x HRTIM (high-resolution and complex waveform builder)
- 2x advanced control timers
- 2x 32-bit + 4x 16-bit general-purpose timers
- 2x basic timers
- Enhanced analog-to-digital converter system
- 5x SAR analog converters
- 2x sigma-delta analog converters
- Digital-to-analog converters (DAC)
- 2x buffered external channels
- 8x unbuffered internal channels
- 8x comparators
- 1x CORDIC hardware accelerator for trigonometric functions acceleration
- 12x timers
- Communication interfaces
- 4x modular controller area network (MCAN) modules, all supporting flexible data rate (ISO CAN-FD)
- 3x UART modules with LIN functionality
- 4x serial peripheral interface (SPI) modules, 2x multiplexed with I2S interfaces
- 2x I2C modules
- Advanced debug and trace for high-performance automotive application development
- Built around Arm® CoreSight™-600
- Arm® CoreSight™ JTAG (IEEE 1149.1) or SWD Debug interface
- Embedded trace FIFO for both on- and off-chip tracing
- Trace port for off-chip tracing, parallel trace port configurable from 1 to 8 data lines
Videos
Development Tools
STMicroelectronics ST Edge AI Suite Software & Products
A collection of tools for integrating edge AI features in embedded systems.
STMicroelectronics SR5E1-EVBE5000P MCU Evaluation Board
Designed for the evaluation of the SR5E1E5 Stellar E1 automotive MCU in a QFP144 package.
STMicroelectronics SR5E1-EVBE7000P Evaluation Board
Enables access to all the functionalities of the SR5E1E7 Stellar E1 automotive MCU (QFP176 package).
STMicroelectronics STELLARLINK In-Circuit Debugger/Programmer
Provide a cost-effective, small-size, and fast-prototyping solution for vehicle applications.
STMicroelectronics STEVAL-TTM007A Control Board
Designed for high-voltage motor control applications, like traction inverters and ASIL D systems.
Related Application
STMicroelectronics Powers Euro 7 Testing with Molex & Bourns
Euro 7 testing solutions that ensure accurate emissions data, compliance, and faster certification.
Complete Your Design
STMicroelectronics Standard Products
A broad range of drop-in replacements for general-purpose analog ICs, discretes, and serial EEPROMs.