The STMicroelectronics STM32L4 Discovery Kit for IoT Node is an Internet of Things (IoT) development kit containing an STM32 ultra-low-power microcontroller, several types of sensors, and several types of wireless communications interfaces, including Wi-Fi, Bluetooth, and Sub-GHz (868/915MHz). It’s ideally suited for prototyping sensor applications that connect to the cloud. Various integrated development environments (IDEs) can support software development. Libraries are available for implementing functions such as board initialization, sensor input/output (I/O), Transmission Control Protocol/Internet Protocol (TCP/IP) networking, cloud communication protocols, and security processing. The board contains a built-in ST-LINK interface for programming and debugging using a personal computer running Windows, Mac OS/X, or Linux. The embedded Wi-Fi module allows the board to connect to an 802.11b/g/n Wi-Fi access point for Internet connectivity.
Google Cloud IoT is a cloud service on the Google Cloud Platform. It allows you to define registered IoT devices along with their device identifications (IDs) and security credentials. This cloud service creates publish and subscribe topics, which allow the secure exchange of messages between IoT devices and the Google Cloud. Other applications and Google Cloud services can subscribe to receive these messages to take further action on the data. IoT devices can also receive commands and configuration parameters by publishing messages to corresponding topics.
The STMicroelectronics X-CUBE-GCP software package provides the essential software to get the STM32L4 Discovery Kit for IoT Node working with the Google Cloud. This software package contains several components and libraries including microcontroller initialization, board sensor I/O drivers, real-time operating system (RTOS), MQTT and TLS libraries, and a TCP/IP networking stack. An example program illustrates an end-to-end operation, and you can modify the source code to extend and adapt to your own applications. The software is downloadable for free from the STMicroelectronics website.
To use your own STM32L4 Discovery Kit for IoT Node with the Google Cloud, check out our step-by-step Integrating the STM32L4 Discovery Kit IoT Node with Google Cloud Platform Using Wi-Fi article that walks you through the entire process of:
There, we also show you how to observe the published data by subscribing to the message-data topic using a Python program. A set of next steps gives you suggestions for how to extend and adapt the application for different IoT prototyping scenarios or to learn more.
Greg is an architect, engineer and consultant with more than 30 years experience in sensors, embedded systems, IoT, telecommunications, enterprise systems, cloud computing, data analytics, and hardware/software/firmware development. He has a BS in Electrical Engineering from the Univ. of Notre Dame and a MS in Computer Engineering from the Univ. of Southern California.
Privacy Centre |
Terms and Conditions
Copyright ©2022 Mouser Electronics, Inc.
Mouser® and Mouser Electronics® are trademarks of Mouser Electronics, Inc. in the U.S. and/or other countries.
All other trademarks are the property of their respective owners.
Corporate headquarters and logistics centre in Mansfield, Texas USA.